Ego Installation Manual

Installation and user Instructions EGO PRIME solar collector with integrated storage.

EGO PRIME solar collector with integrated storage was designed by an Italian company, and all its components are produced 100% in Italy. After its simple installation, you can enjoy the beauty of its design, the practicality of its operation and the guarantee of its performances:

A. The solar collector; The supporting frame of the collectors is made of galvanized steel. The external protective structure is made of the aluminium case

1, light and resistant. The transparent cover is of LEXAN®

2, a 10 mm twin-wall polycarbonate sheet that has been anti- UV treated. In comparison with traditional solar glass, the sheet is 80% lighter, it limits heat dispersion at night, it guarantees optimal transparency to solar radiation and it increases resistance to bad weather.

The lower thermal insulation is made of a polyurethane foam panel, 30 mm thick, that is coated with sheets of aluminium; the lateral insulation is made of 4 sheets of natural fibre polyester, 25 mm thick. B. The storage The domestic water accumulation system is made of a series of high-performing stainless steel cylinders 3 made of a special alloy that resists high pressures and also very corrosive water.

The cylinders are closed at their ends by special caps 4 made of thermoplastic material loaded with glass fibre, to unite lightness and resistance. The caps are connected to each other by copper connecting pipes, which allow the water to move from one cylinder to the next. The supports for flat roof 5 are available in two models: – BASIC SUPPORT: pair of galvanised sheet supports (supplied standard);